1. First, download Genio mixed with S1 firmware by Admir from here. (mirror1 & mirror2). Download kernel from here or here and put it in 'genio mixed with s1 by Admir\rockdev\image' folder.
2. Extract downloaded archive. Copy the content of SDcard folder on a micro SD card, then insert it in your Pipo S1 tablet.
3. Connect tablet in bootloader mode.
4. If you don't have driver installed you can install it from "drivers" folder.
5. Go to the folder RKDevelopTool_v1.35 and run RKAndroidTool (do not change anything!).
6. If drivers are installed correctly, in the bottom will say "Found RKAndroid Loader Rock Usb".
7. Press Erase IDB and wait after it finish press OK (it will take 10-20 seconds)
8. Uncheck loader file then press 'Run' button. Tablet will restart in Recovery mode when everything finish.
9. Select install zip from sdcard / choose zip from sdcard and apply corrections from SDCARD folder, strictly in order!
10. Reboot, and wait till it start (first run may take up to 5 minutes)
11. Root only using this video guide.
3. Connect tablet in bootloader mode.
4. If you don't have driver installed you can install it from "drivers" folder.
5. Go to the folder RKDevelopTool_v1.35 and run RKAndroidTool (do not change anything!).
6. If drivers are installed correctly, in the bottom will say "Found RKAndroid Loader Rock Usb".
7. Press Erase IDB and wait after it finish press OK (it will take 10-20 seconds)
8. Uncheck loader file then press 'Run' button. Tablet will restart in Recovery mode when everything finish.
9. Select install zip from sdcard / choose zip from sdcard and apply corrections from SDCARD folder, strictly in order!
10. Reboot, and wait till it start (first run may take up to 5 minutes)
11. Root only using this video guide.
Enjoy this fine release! Credits for this go to Admir Botonji.
This ROM should be the best one for games. Kernel is from Realmaple so you will hear crackling from speaker but it wont stop working.Don't worry if you see anything strange while rebooting or booting, everything will work.DPI 120, shown as Nexus7 in build.prop, no volume and screenshot buttons in taskbar.
Always keep in mind that this is not a review, just a first look at this firmware. You have to test it more for another details, to see if it satisfies your needs.
Sign up here with your email
ConversionConversion EmoticonEmoticon